A9: Citizens can write, call, or e-mail
the City Traffic Engineering Division to request the installation
of a traffic signal at a particular intersection. Traffic engineers
follow certain State and federal guidelines and criteria called
“warrants” to evaluate the intersection for a signal
installation. If the intersection meets the warrants, it is
then added to a list of other qualified intersections in the
City. In 1995, the City established an annual signal priority
program, which determines the need for signalization on City
intersections. The program provides a ranking system among the
intersections that meet the signal warrant criteria, and is
then approved by the City Council. The ranking system is based
upon various traffic data, such as traffic and pedestrian volumes,
accident history, speeds, delays, intersection configuration,
proximity to signalized intersections, schools and senior citizens
residents, and relevant site-specific factors. The annual signal
priority program provides maximum safety to the community by
allocating limited funds to install a traffic signal at the
most critical or high-priority location(s). The cost of a traffic
signal is approximately $160,000 per intersection and more than
$10,000 a year for maintenance and energy costs. Sometimes traffic
signals are installed as part of a private development to mitigate
traffic impacts. Their location must also meet the State guidelines
and “warrants.”
Q10: HOW DO I GET A LEFT-TURN SIGNAL?
A10: Left-turn signals are called “protected”
left-turn signals. They can be helpful in giving drivers the
right-of-way to complete left-turns free of any other traffic
conflict, but when there is no opposing traffic, they can cause
unnecessary delays. The City uses State guidelines for installing
left-turn signal phasing at existing and proposed intersections.
These guidelines consider traffic volume, accident history,
traffic delay and other elements, such as sight visibility.
The guidelines ensure that treatments, such as left-turn signal
phasing, are consistent from one intersection to the other based
on traffic conditions.
Q11: CAN YOU SYNCHRONIZE THE SIGNALS ALONG
A PARTICULAR ARTERIAL?
A11: Traffic signal synchronization
is a method of timing groups of traffic signals along an arterial
to provide smooth movement of traffic with minimal stops. The
quality of the resulting progression is a function of the spacing
of the signals, the prevailing speeds, the amount of traffic
coming in and out of driveways between traffic signals, the
uniformity of intersection sizes, and the cycle length.
Not all City streets warrant synchronization.
Typically, a street is selected for synchronization if it carries
a certain amount of traffic along the arterial during peak hours.
Most of the City’s major streets are selected, like Soledad
Canyon Road, Whites Canyon Road, portions of Sierra Highway,
Valencia Boulevard, Lyons Avenue, and portions of McBean Parkway,
Orchard Village Road, portions of Bouquet Canyon Road, and Seco
Canyon Road. In most cases, synchronization is active from 6:00
a.m. to 7:00 p.m. during weekdays. The individual signals operate
on a “first-come-first-served” or traffic activated
basis outside of these hours, or all the time if a street is
not selected to be synchronized.
Q12: I CANNOT SEE THE ONCOMING TRAFFIC AT
A PARTICULAR INTERSECTION OR WHEN EXITING MY DRIVEWAY. CAN YOU
HELP?
A13: Traffic Engineering staff usually
conduct a field study in the area adjacent to a driveway or
at a particular intersection where there is a sight visibility
concern, to determine whether or not prohibition of parking
adjacent to the driveway or near the intersection is recommended.
In addition to the study, staff checks accident records for
the location for the past 12-month period to determine if the
collision data supports the need to remove any parking spaces.
In all cases, motorists should exercise caution
when leaving private property or a side street. The 2002 California
Vehicle Code (Division 11, Chapter 4, Section 21804(a)) states
that motorists entering a highway from public or private property
shall yield the right-of-way to all traffic on the highway and
shall continue to do so until he or she can proceed with reasonable
safety. Motorists should move forward toward the edge line of
the parking lane, thus gaining more visibility to safely exit
the driveway or side street.
Q13: CAN I PAINT THE CURB RED AND INSTALL
MY OWN TRAFFIC SIGNS ON MY STREET?
A13: Traffic signs and markings shall
be placed on public streets only by public authorities or officials
having jurisdiction, for the purpose of regulating, warning,
or guiding traffic as stated in the California Department of
Transportation Traffic Manual (CALTRANS). The City installs
curb paint/no-stopping signs, or other traffic signs and markings
after careful examination for their needs and impact on City
streets. Therefore, all signs or curb markings in the public
right-of-way must be installed by the City or with the City’s
approval. If these signs are not done by the City or without
City approval, they are illegal and cannot be enforced. Furthermore,
such actions by an individual present an unnecessary liability
in case an accident occurs in the area where these signs or
curb markings have been installed illegally, and the City cannot
provide records to justify the need for these signs/markings.
The CATRANS Traffic Manual also states that any unauthorized
sign placed on the highway right-of-way by private organizations
or individuals constitute a public nuisance and shall be removed.
Q14: CAN THE CITY PAINT THE CURB RED IN
FRONT OF FIRE HYDRANTS?
A14: The subject of parking next to
fire hydrants is addressed in the California Vehicle Code (CVC)
in Section 22514, which states, “No person shall stop,
park, or leave standing any vehicle within 15 feet of a fire
hydrant…”
Since the CVC already states that it is illegal
to park within 15 feet of a fire hydrant, whether or not there
are signs or red curb, the City is not required to designate
the area in front of a fire hydrant as a no-stopping zone. It
is generally City policy not to install signs for situations
that are already addressed in the CVC.
If there is a pattern of repeated violations
by motorists parking next to particular fire hydrants, it can
be addressed by increased enforcement by the Sheriff’s
Department.
Q15: DOES THE CITY PAINT THE CURBS RED FOR
NO-STOPPING ZONES?
A15: The City is now using no-stopping
signs instead of painting the curbs red to prohibit street parking.
Signs are easier to keep and maintain. The red curb paint tends
to fade overtime and requires periodic maintenance.
Q16: HOW CAN I GET WARNING SIGNS SUCH AS
“NOT A THROUGH STREET” AND SIDE ROAD SIGNS ON OUR
CITY STREETS?
A16: Traffic staff will investigate
the location to determine if the installation of such signs
is warranted or needed. Warning signs are normally installed
to guide and warn traffic of conditions on or adjacent to a
highway or street which would not be readily apparent to drivers.