2018 LIST OF STREETS RECEIVING OVERLAY 

 

PROCESS:

  1. Grinding: Grind and mill old asphalt, including removal of sections of the top layer
  2. Paving: Place first level of overlay: Pave the street and wait for it to set
  3. Paving: Place final overlay pave and set

CONSTRUCTION HOURS:

Construction may occur anytime between the hours of 7:00 a.m. and 4:30 p.m. Monday through Friday.    

LENGTH OF PROJECT:

  • Overlay treatment on a street may be stretched across a few weeks and requires multiple phases.
  • Grinding may take a few days.
  • Usually, paving takes place about a week after grinding and requires a few days.Signs will be posted on the street prior to the start of work.
  • Some night work may be required.
  • Construction for locations within school zones will be between the hours of 9:00 a.m. and 2:00 p.m. Monday through Friday.

PARKING AND STREET ACCESS DURING CONSTRUCTION:

During grinding

checkmark Driving on street allowed.
blue-X Parking on street restricted (cars must be parked 1,000 feet away from construction site). All cars in the “No Parking” zone during construction time will be towed.
checkmark Parking in driveway allowed.

During paving:

checkmark

Access open to through traffic. Can drive on the side of street where paving has not taken place yet.

blue-X Parking on street restricted (cars must be parked 1,000 feet away from construction site). All cars in the “No Parking” zone during construction time will be towed.
checkmark Parking in driveway allowed, but there will be no access in and out of a driveway once treatment is applied until it is dried. 
blue-X

Once street is paved, it will be closed for approximately 2 to 4 hours. The street should be reopened by the end of the working day to allow for the overlay to set.

 

PLEASE NOTE: The City and project contractor will coordinate with trash companies, the post office and other agencies to minimize any disruption of services. 

HELPFUL TIPS:

Do

  • Park off-street during construction and pay close attention to parking notices. There will be detailed notices explaining when the streets will be closed and re-opened throughout the resurfacing process. 
  • Make a plan for when you will need your car during construction. Driving through the newly resurfaced street will ruin your car, driveways and the project, forcing contractors to begin again.
  • Drive slowly through the construction zone during the times cars are allowed on the street. This will prevent rock-fragments from damaging windshields.
  • Keep children and pets away from the street during resurfacing. At times the pavement will be extremely hot and dangerous. 

Don’t

  • Don’t run water onto the street the night before or after construction. Run-off will delay work and damage the new surfacing.